Skip to content
Home Appliances
Log in / Register

Chimney Hoods Installation

A quick guide on best practices for installing your Bosch home appliances

Installation methods and measurements may vary from model to model - check the installation manual or consult your contractor for more details.

How to install your chimney hoods

1. For recirculation mode installation

1. The appliance comes with a recirculating kit and charcoal filter(s).

2. The appliance has to be fitted with the charcoal filter(s) to remove pungent food odours.

3. Refer to instruction manual on installation steps for recirculating kit.

2. Correct Installation Method for Ducted Hood System

1. The pipe is not bent immediately at the exhaust opening. There is a minimum distance of 30cm between exhaust opening and the first bend.

2. There is only 1 bend on the pipe duct.

3. The length of the pipe duct is kept as short as possible.

4. The surface of the inner duct is even and smooth.

5. The duct is designed to be as wide as possible for optimal air flow.

6. The opening of the lamella in the wall box is kept as wide as possible and micro mesh is not used.

3. Wrong Installation Method for Ducted Hood System

1. Pipe is bent immediately at the exhaust opening. Leave a minimum distance of 30cm between exhaust opening and the first bend.

2. There are more than 2 bends on the pipe duct with 1 bending at a sharp 90°angle. Ensure that there is only 1 bend and choose a gentler 45°angle.

3. The pipe duct is too long. Keep it as short as possible.

4. The inner duct is rough and uneven. Choose a surface that is even and smooth.

5. The duct design is narrow at certain parts. Ensure that the duct design is as wide as possible for optimal air flow.

6. For the wall box, keep the opening between lamella wide and avoid using micro mesh to reduce back pressure.

MyBosch

Register for product warranty and enable us to reach out to you with tips & tricks for the usage of your appliance.

Our service

We’re here to help, before and after your purchase.

Customer Care Centre

Address: 38C Jalan Pemimpin, #01-01, Singapore 577180

Open from Mon - Fri, 8.30am - 5.30pm (Closed on Sat, Sun and PH).

Please note that our Customer Care Centre will open at 9.30am on 24 April 2024 due to internal training. Thank you and sorry for the inconvenience caused.

Customer Care Hotline

Phone: +65 6751 5000

Monday to Friday: 9am to 6pm Saturday: 9am to 1pm (Closed on Sun and PH)

Experience Bosch

Discover quality, perfection, and reliability.

Experience Centre

Address: 11 Bishan St 21, #04-02, Bosch Building, Singapore 573943

Opening Hours: Mon - Fri, 9am - 6pm (excluding PHs)

Tel: +65 6356 1080
Email: bsh.ec@bshg.com

You are encouraged to make an appointment via email (bsh.ec@bshg.com), stating clearly your preferred date and time of visit within our opening hours, so we may promptly attend to your needs.

The Experience Centre is closed for private events on the following dates:

23 Februrary (12-3pm)

Find a dealer

Find dealers or service shops near you!