Washer Dryers

> Home
Preparing Unit for installation
  • The installation area must be firm and level.
  • Soft floors and floor coverings are not suitable.
  • To ensure good drying results, ensure that the room is well ventilated.
  • Ensure that the washer dryer is connected to a power socket, separate from that of a washer.
Before Installation Step 1
Leveling

Level the appliance using a spirit level. Incorrect leveling may result in intense noise, vibrations and shifting of position.
  1. Loosen the lock nuts using a WA17 wrench, by turning it in a clockwise direction.
  2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet. All four appliance feet must stand firmly on the ground.
  3. Hold the foot tightly and do not adjust its height. Tighten the lock nuts on all four appliance feet against the housing.
Preparing the unit for Installation
Tip - The following are available from customer service:
  • An extension for Aqua-Stop or cold water supply hose (approx. 2.50 m) if available.
  • A longer supply hose (approx. 2.20 m) for standard model.
Water Drainage

Water can be discharged via a siphon, sink, stand pipe or gully. Here are some tips to take note of when draining water using the following methods.